Keeper of the Ark.
The Ark @fosscad.io 10/22 mag adapters?
Originally posted by u/bookerdewittt at 2025-06-11T23:23:02Z
Anyone know if there is a MP5 22lr to 10/22 mag conversion out ? Kinda niche item
The Ark @fosscad.io Section 8
Originally posted by u/XxTHEGOATxx1644 at 2025-06-11T23:21:10Z
Looking for a stl for section 8 housing? Nd lower receiver pm me
The Ark @fosscad.io purple drank
Originally posted by u/EntertainerNo6495 at 2025-06-11T22:07:35Z
has anybody tried to use the purple drank suppressor on .223/5.56? i kinda wondered if it would just blow up
The Ark @fosscad.io Diy .22 ammo
Originally posted by u/Lakile342 at 2025-06-11T22:01:59Z
Guys i cannot find any information or guides on how to make it. Can someone point me in the right direction on where to find it of how ro build it
The Ark @fosscad.io Safe infill % for Frame?
Originally posted by u/Gualuigi at 2025-06-11T21:31:31Z
Im planning working with a 43x frame by PP, I just don't know what % infill is decent enough for a frame. I am using Sunlu's PLA+ and PLA+ 2.0.
The Ark @fosscad.io Pa6 nylon issues…..
Originally posted by u/Organic_Key6274 at 2025-06-11T21:30:44Z
I dried the fiberon pa6 nylon for 24 hour at 100c and am printing at 280 degrees but it still coming out in globs and twisty, anyone have any ideas ?
Source: https://b.thumbs.redditmedia.com/ZBUDSse5jb5LeLl-gK0hzJuDjkGXbFDzigg82OKwUvI.jpg
The Ark @fosscad.io I'm using PLA plus and I'm trying to get the stringy stuff to quit any advice
Originally posted by u/Electronic_Skirt_683 at 2025-06-11T21:28:08Z
I haven't really messed with the settings I use a ender 3 v3 plus and orca slicer still new the main reason I bought it was to make stuff for my guns 😂
Source: https://a.thumbs.redditmedia.com/6UN3TDzCBXHFbvzQy6gzPl2GPElBKAFxFPveu3qGjv8.jpg
The Ark @fosscad.io Super duper safe Tec9??
Originally posted by u/GaylordGunSlapper at 2025-06-11T21:07:41Z
Anyone know of or heard anything about a tec9 SS?
The Ark @fosscad.io hii
Originally posted by u/LibrarianOpen9238 at 2025-06-11T21:04:23Z
[removed]
The Ark @fosscad.io DB Alloy troubleshooting
Originally posted by u/Glassimamaya at 2025-06-11T20:49:44Z
Finally got around to bringing my first print out and ran into some issues. ~150 rounds today and a large amount of FTF. After a good amount I noticed the forward part of the upper receiver is bent. I also noticed a couple rounds where it failed the bolt is tearing into the primer pocket and almost unseating it. I know the Mac design has some problems regarding feeding but this surprised me. Build is AVES upper receiver and feed ramp, bolt is from KAK, and printed in PA6-CF. thanks for any insight!
Source: https://b.thumbs.redditmedia.com/K6PnSgdRn_oF7bIk2um1dGULtqE-_4URNIagC0vfkGg.jpg
The Ark @fosscad.io Gen 5 +2 mag extension
Originally posted by u/5kbamz at 2025-06-11T20:40:23Z
Anyone have an stl with these?
Source: https://i.redd.it/dzdn5cdd0d6f1.jpeg
Source: https://a.thumbs.redditmedia.com/wvYY_ofv6sl2oyPCtv22nAXPgxvVgmyoqOxBjQT4kT8.jpg
The Ark @fosscad.io Does anyone have a very simple file just for me to test and print?
Originally posted by u/No_Growth9602 at 2025-06-11T20:36:35Z
[removed]
The Ark @fosscad.io Does anyone have a simple impression?
Originally posted by u/No_Growth9602 at 2025-06-11T20:33:58Z
[removed]
The Ark @fosscad.io Best entry level printer?
Originally posted by u/isufan2388 at 2025-06-11T20:12:14Z
Hello there fellow gun enthusiasts I have been doing a little digging on these 3d printed guns and they seem awesome to me, I’m looking for a 3d printer that doesn’t break the bank doesn’t need to have all the bells and whistles of these others I’m just looking for one that can print with reasonable quality, mainly just want one that can print a little 22lr and won’t blow up in my hand, any suggestions?
The Ark @fosscad.io Rogue 9 25 rounds magazine spring
Originally posted by u/VisitorFromOuterSpac at 2025-06-11T17:43:05Z
I was wondering which length the magazine spring has for the 25 rounds magazine. I could only get my hands on a 30 round magazine spring so just need to cut it shorter. Anyone knows the measurements for the length? Or will the 30 menendez extendez magazine fit into the rouge 9? Thanks in advance
The Ark @fosscad.io Does anyone have a simple printout for me to test?
Originally posted by u/No_Growth9602 at 2025-06-11T17:28:16Z
[removed]
The Ark @fosscad.io Does anyone have a printout for me to test?
Originally posted by u/No_Growth9602 at 2025-06-11T17:25:02Z
[removed]
The Ark @fosscad.io Opinions on PA CF for Receivers and large accessories, as well feasibility on FFAD5M PRO.
Originally posted by u/ClandestinePleb at 2025-06-11T17:20:06Z
[removed]
The Ark @fosscad.io PeWalt complete
Originally posted by u/Regular_Rip84 at 2025-06-11T17:13:22Z
Finished it up today
The Ark @fosscad.io DD19.2 Slide doesn't lock back when applying downward pressure on slide
Originally posted by u/smelly_and_huge_BMs at 2025-06-11T16:24:04Z
Wondering if this is a big enough issue to worry about. When racking the slide back, if I don't press down on the slide, I'm able to lock the slide back fine. It's only when applying downward pressure that the slide doesn't lock back fully.
I noticed that if I take the trigger pin out (the pin that goes in the grip), the issue goes away, but obviously I shouldn't fire it without that pin installed. I already reamed out the hole in the trigger assembly a little to get everything to line up better back there, so I'm wary of removing any more material to try and make it work. Am I tripping too much? Should I just go ahead and test fire it anyways? The trigger resets fine. I have printed two frames, one rails up, one rails down, and the issue persists in both frames.
u/Solrac_Morua · 2024-12-10 19:45:24 UTC · score 1
Ender 3 V3, Cura slicer, 10 walls, 99% gyroid infill, 100-150 mm/s. Lmk if I missed something or u want actual pics of settings