Flash Forge Adventurer 5M Pro, Pausing...?
Flash Forge Adventurer 5M Pro, Pausing...?
Originally posted by u/ClandestinePleb at 2025-06-19T20:36:59Z
Hello,
I have owned an FF AD5M Pro for about 4 months now. It has worked great until around 2 days ago.
Rexently, the machine goes to print and the following happens with approximately a 90% likelihood, no matter the object I am printing.
The extruder just sits in the back right corner after the nozzle/bed temps rise/stabilize at the print temp, as well pre-print levelling getting performed, but nothing makes noise or moves after that. The display also will show the print's progress between 1-10%... I don't know if the progress bar on the display factors in the startup tasks such as temps, levelling, etc.
I have updated the firmware on the printer, ensured orca slicer is updated, tried simple models, restarted the printer, checked cable/electrical connections, etc... everything seems kosher.
I send prints to the printer via ethernet cable.
Any suggestions, please?