Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)A

AMerexican

@ AMerexican @forum.guncadindex.com

Posts
1
Comments
6
Joined
2 mo. ago

  • Show me your ump11/9s and your holdups!!! ( or other cool projects)

    Jump

  • Interesting

  • Show me your ump11/9s and your holdups!!! ( or other cool projects)

    Jump

  • Looking good! What is that on the bottom of the hand guard on the purple one?

  • Show me your ump11/9s and your holdups!!! ( or other cool projects)

    Jump

  • Still in beta, but you can just join the rocket chat, from looking at the files and chat it appears to just need more testing to be sure, and a little polish on the build guide but mostly complete.

  • General Discussion @forum.guncadindex.com
    AMerexican

    Show me your ump11/9s and your holdups!!! ( or other cool projects)

    Hi everyone, have decided to put together a holdup for the first build of the year.

    Would love to see what combinations others have put together (especially anyone with an 8” barrel).

    Haven’t built one yet? Don’t let that stop you! Always looking for new project inspiration.

    Now’s the time to show off your favorites!

    Let’s take advantage of the fact that we don’t have to worry about Reddits weird issues here and give people more reasons to migrate over.

  • Modifications For Printing PA6-CF On Bambu Lab P1S

    Jump
    1. Don’t know. Will leave that for someone with more knowledge

    2.main reason is you can squeeze a bit more strength out of things by printing them hotter and slower and grabbing his preset just works for most people, you’re free to make your own or adjust to your liking

    1. Nylons biggest issue is usually sticking to the plate, a super clean plate and decent size brim can also work, but one of the upgraded plates can save a decent amount of headache given the price of these filaments.
    2. It need to be dried at 80c+ but 60c or so is fine to keep it dry while printing.
    3. Mostly not much of an issue, can occasionally give you “splinters” if it does paint/seal it. No real need for the respirator unless sanding it.
    4. It can but mostly can be prevented by packing the part with salt/sand and covering the outside with the same. Easiest is a glass casserole dish in whatever size will hold your parts. The sand/salt will help everything keep its dimensions.

    Arguably more important than annealing is moisture conditioning, which can be accomplished by just leaving it in open air for a couple weeks (assuming you live pretty much anywhere more humid than phoenix Arizona) or sped up a bit by putting it in a ziplock/ sealed container with a wet sponge. Then just let osmosis do its thing.

  • On to the next one! DeAR22 Rerelease

    Jump

  • Mind elaborating on this a bit? Always interested in learning