Skip Navigation

User banner

Noah

@ noah @fosscad.io

BOT

Posts
68212
Comments
970040
Joined
3 mo. ago

Keeper of the Ark.

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/Comfortable_Cry_8714 · 2024-05-19 15:59:24 UTC · score 1

    Yea it’s fuzzy on the inside was I supposed to turn on the outside only fuzzy also it all fits together just snug only thing I had a problem putting in was my pins and that’s only becaus I don’t like to just hammer them in all ruff so I dremeled the holes out

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/Comfortable_Cry_8714 · 2024-05-19 06:10:42 UTC · score 1

    Took me forever to install the lpk everything fit super small and I needed to give everything alot of love taps to get it into place

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/ThomasOrrow · 2024-05-19 12:26:55 UTC · score 5

    Is it fuzzy everywhere?! No wonder it didn't fit together. It's literally fuzzy on the inside

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/Gunsafe12 · 2024-05-19 06:19:35 UTC · score 14

    Shit looks fucked up

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/Ak47Sahan · 2024-05-19 13:32:59 UTC · score 2

    Set your fuzzy skin settings to .1/.1 and it will come out much better.

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/temporar-abalone353 · 2024-05-20 20:59:31 UTC · score 1

    Please just tune your printer. Showing anyone this makes our whole community look bad.

  • first print with the fuzzy skin setting helps me hide minor cosmetic damage, also looks like rhino lining to me which is pretty neat

    Jump

  • u/BadManParade · 2024-05-19 16:27:46 UTC · score 2

    Did you fuzzy the inside too? Bro what are you doing 👉🤪👈

  • Thought I should post something, since I'm on here looking at everyone else's stuff. One of several 2a prints. Not sure if I like the trigger, but with the ghost disconnector it's pretty good.

    Jump

  • u/Disastrous_Video9751 · 2024-01-05 15:57:29 UTC · score 3

    Disconnector upgrade $10-25, lowers trigger pull. Have to be careful with installation and polishing. You can accidentally create something dangerous, especially if unexpected and illegal. Disconnector is what keeps it from going full fun. I haven't experienced any issues, but plenty of YouTube videos talk about it.

  • Thought I should post something, since I'm on here looking at everyone else's stuff. One of several 2a prints. Not sure if I like the trigger, but with the ghost disconnector it's pretty good.

    Jump

  • u/greg_at_earms · 2024-01-05 12:10:46 UTC · score 1

    What's the ghost disconnector?

  • I’ll do it myself lol

    Jump

  • u/S31ZE · 2023-05-01 13:56:21 UTC · score 2

    I moderately good, I just don’t want too 😁. I am planning on setting up a pixel 6 with grapheneOS and ATAK soon but so far there isn’t really any companies that make a pixel 6 case + mount setup. I prob do it myself when I get the phone in hand.

  • I’ll do it myself lol

    Jump

  • u/Fine-Explanation-718 · 2023-05-01 03:25:24 UTC · score 16

    Just google juggernaut case STL there different ones out there not hard to find.

  • I’ll do it myself lol

    Jump

  • u/Fine-Explanation-718 · 2023-05-01 13:53:05 UTC · score 3

    How good are you with CAD . You can compare it to one that is already made for a different phone and alter it to fit that pixel. Want the link to the ones I found?

  • I’ll do it myself lol

    Jump

  • u/S31ZE · 2023-05-01 13:43:32 UTC · score 2

    👍 I was just looking yesterday for a case for the pixel 6. Looks like I’m gonna have to make one, they stopped the pixel line at the 5.

  • I’ll do it myself lol

    Jump

  • u/Sneaky-sneaksy · 2023-05-01 03:22:55 UTC · score 31

    Yes, give us the file and we will dial back the weaponized autism

  • I’ll do it myself lol

    Jump

  • u/FauxReignNew · 2023-05-01 04:59:29 UTC · score 18

    To put a phone on your kit for use with ATAK, comms/nav/planning software.

  • I’ll do it myself lol

    Jump
  • The Ark @fosscad.io
    Noah
    BOT

    Streamlight screwdriver

    Originally posted by u/Mountain-Piglet-8037 at 2025-06-17T22:19:00Z

    Reddit permalink

    Sailing on the sea as Mountainpig4077 Also on maker world as mountainpig “Streamlight tlr7x screwdriver” My screwdriver was getting damaged a little bit so I made this and it works.

  • The Ark @fosscad.io
    Noah
    BOT

    Ar22 with integral FRT

    Originally posted by u/monsieurLeMeowMeow at 2025-06-17T21:02:28Z

    Reddit permalink

  • The Ark @fosscad.io
    Noah
    BOT

    PC CF ( Polycarbonate + Carbon Fiber ) vs PA CF ( Nylon +Carbon Fiber

    Originally posted by u/ClandestinePleb at 2025-06-17T21:00:20Z

    Reddit permalink

    After doing some research on the advantages and drawbacks of both PC CF and PA CF, it seems PC CF is the better option due to ease of printing, dimensioal accuracy, dimensional consistency and strength over time ( low-to-no hydroscopicness, ) lower cost, better surface finish, resustance to common pew related solvents/oils and less post processing.

    Can any one confirm if I am correct in my assumption or on the right path? Any arguments for PA CF out right over PC CF? I figured it best to check here as I typically see people printing pews in PA or PA CF of some sort, and assumed it can't just be for no tangible reason.

  • The Ark @fosscad.io
    Noah
    BOT

    Saiga 12 Bullpup Conversion

    Originally posted by u/KineticTechProjects at 2025-06-17T20:47:26Z

    Reddit permalink

    This is a conversion project for a sporterized import saiga 12 to bullpup. STL only for now. This is just in beta and while it works mostly ok, you may run into fitment/durability issues. I designed it rather beefy and mine is printed in ASA. Feel free to direct feedback my way. Files posted on the sea under Kinetic Technology Projects.

    Source: https://i.redd.it/lll2xsp4tj7f1.png

  • The Ark @fosscad.io
    Noah
    BOT

    ar handguard on rogue-9

    Originally posted by u/OddEquipment6109 at 2025-06-17T20:08:12Z

    Reddit permalink

    can i place ar handguard on my roge-9? somebody tried or its possible?

  • The Ark @fosscad.io
    Noah
    BOT

    Blew up da FTN

    Originally posted by u/Scootin-putin at 2025-06-17T19:52:00Z

    Reddit permalink

    FTN 3.5 EZ in Polymaker pro from P1S- Great performance from a MAC-5k but on G48 manual cycling was needed, probably because the sheer amount of casting tape. Ran a couple mags through both of them before deciding to do a full blown magdump. Made it through about a mag and a half before blowing out in one of the rear chambers. Also glad that casting tape makes for a decent fragment liner because PPE was not fully employed.

  • The Ark @fosscad.io
    Noah
    BOT

    Hi everyone, no one has an STL file or ROGUE-9 bolt files to have it machined directly?

    Originally posted by u/TurbulentDesk7307 at 2025-06-17T19:39:14Z

    Reddit permalink

  • The Ark @fosscad.io
    Noah
    BOT

    Any FRT triggers on the VMAC series of fire arms ?

    Originally posted by u/mrwarmageddon at 2025-06-17T19:21:32Z

    Reddit permalink

    I’ve seen people working on macdaddy FRT triggers but is there anyone working on a legit MAC series metal receiver ? Only asking because I’d like to help crowd fund it since the MAC is a staple of my gun addiction due to cheesy 1980’s movies .

  • The Ark @fosscad.io
    Noah
    BOT

    sticky mag release help

    Originally posted by u/Long_Concentrate_692 at 2025-06-17T19:19:39Z

    Reddit permalink

    so ive had my g26 for over half a year now and i love it. it has one issue (im lying this is just the one that bothers me most) the mag release is so fucking sticky, as in, i have to press it from the opposite side for it to hold onto a mag. ive tried taking the spring out to try to sand the release button down but it doesnt budge. any help?

  • The Ark @fosscad.io
    Noah
    BOT

    Hdc22 test fire

    v.redd.it /5gjujrr16j7f1

    Originally posted by u/rodriguez22lr at 2025-06-17T18:27:32Z

    Reddit permalink

    Didnt extract maybe cuz the barrel is a 5.6 id with a chamber made with 5.7 drill bit,

  • The Ark @fosscad.io
    Noah
    BOT

    NAK9 glock mag adapter for standard AK mag catch.

    Originally posted by u/remyybravo at 2025-06-17T18:04:41Z

    Reddit permalink

    Looking for the mag adapter I can print and attach to my glock mags for my NAK9. I purchased 3 of these from the guys over at Stuff and Things Inc, but they seemed to come loose from the mags and the fitting wasn’t ideal.

    Any help would be appreciated!

  • The Ark @fosscad.io
    Noah
    BOT

    Mp5.7(chassis) charging handle help

    Originally posted by u/H00dIumm at 2025-06-17T17:53:27Z

    Reddit permalink

    I printed the chassis version of mp5.7 in pa6cf and cannot figure out how to keep the charging handle in place to save my life.

    Anyone who has built or knows the proper way to attach it please lmk its driving me crazy.

  • The Ark @fosscad.io
    Noah
    BOT

    Tough PC

    Originally posted by u/357noLove at 2025-06-17T17:45:14Z

    Reddit permalink

    Polymaker Polymax Tough PC Filament - Has anyone used this/had success printing frames with this? Durability and heat resistance is really good, or is it not a good option for our purposes?

  • The Ark @fosscad.io
    Noah
    BOT

    Pistol Gas Pedal

    Originally posted by u/Feisty_Cheek3844 at 2025-06-17T17:41:33Z

    Reddit permalink

    [removed]

  • The Ark @fosscad.io
    Noah
    BOT

    Hear me out... a double stack PPS that takes PPQ SC mags....

    Originally posted by u/senor_diaz at 2025-06-17T17:27:46Z

    Reddit permalink

    I was today years old when I found out that the Walther PPS is/was an FCU type of firearm. It was never marketed as such and the frame is NON-serialized.

    Think someone can 3D print a "grip module" that takes PPQ SC mags?

    https://youtu.be/CnHeL0BpD/_g?t=351

  • The Ark @fosscad.io
    Noah
    BOT

    Vinh’s SW9 + glock mags

  • The Ark @fosscad.io
    Noah
    BOT

    is this still a suppressor?

  • The Ark @fosscad.io
    Noah
    BOT

    Anywhere for parts-dispensed coupon codes?

    Originally posted by u/Ok_Sample5582 at 2025-06-17T16:54:52Z

    Reddit permalink

    I know reddit has some sections for codes and coupons, just wondering if anyone knows if there are codes for that site.

  • The Ark @fosscad.io
    Noah
    BOT

    Parts

    Originally posted by u/Polokight63 at 2025-06-17T16:45:35Z

    Reddit permalink

    Do y’all buy parts bulk? Is that cheaper than going project by project?

  • The Ark @fosscad.io
    Noah
    BOT

    Thread pitch on vp22 kit