Keeper of the Ark.
The Ark @fosscad.io I wrote (and finally recorded) a song about 3D printed firearms
Originally posted by u/lostinthesauceband at 2025-06-15T19:51:27Z
I.
I shoot PLA, not guns
I squirt and slap that HK, it's such fun
It's Print Shoot Repeat until the mag’s done
When I see the feds, it's not duck and run
II.
It's pop out and pull it. Blow it, you know-
-It's all for YouTube. I'm asking like who
The fuck do you think you are to my god?
Armed and militant behind the facade
III.
I got a slide to go with the glock, the ghost
No numbers like I'm Mason facing out the window
Of the book depository, getting grassy on the knoll
Staying classy on the whole, Robert Hanson like the mole
IV.
But Robert Durst up in my soul
And I ain't talking chopping bodies
All these substances I stole
I'm bending knees like I'm Pilates
V.
No Bugatti. On the roof with half a gram of hash inside my hollowed tooth
I'm past the far beyond,
The Ark @fosscad.io Inner/Outer vs Outer/Inner on Leber V2 lower
Originally posted by u/NiteQwill at 2025-06-15T19:10:52Z
Trying to dial in settings on a Bambu X1C before committing to the first print using Polymaker PLA Pro.
Any recommendations between inner/outer vs outer/inner order of walls when printing?
TIA
The Ark @fosscad.io You nerds like Cyberpunk glonks?
Originally posted by u/RlyehFhtagn-xD at 2025-06-15T19:09:37Z
File's not released yet but I love attention so here I am posting about it early. The Nova Arms Cityhunter X is one of the few named non-exotic guns from the Cyberpunk Red core rulebook. A heavy pistol with 2 rate of fire, and 3d6 damage. There's no official art, so this is my interpretation using some other non canon art I found online as a starting point.
This'll be released soon, I'm printing the frame now. Built for G17L, you'll need an extended slide stop lever and Gen 5 slide stop spring, otherwise OEM Gen 3 parts and FMDA DD17.2 front and rear rails.
The Ark @fosscad.io ETS glock mag +0 base extender
Originally posted by u/Fl-Eggs at 2025-06-15T18:06:44Z
Just some basic base extenders for glock ETS mags. The grooves hold it on really well, but the option m3 bolt in the back makes sure its not going anywhere. On the sea @my username.
The Ark @fosscad.io Partially printed
Originally posted by u/DieKookieM0nster at 2025-06-15T16:27:08Z
Noticed this while scrolling the Aug sub.
The Ark @fosscad.io Galileo Takedown Extended mlok Shroud
Originally posted by u/IGiveMemes at 2025-06-15T16:20:25Z
So I made this. Should've asked before I spent 2 hours making it whether it would work but here I am. Any idea if this will work on the takedown? I dont see a reason it wouldn't so that's why I just went for it but does anyone with a galileo takedown wanna drop some insight?
The Ark @fosscad.io Adapter search for CZAR
Originally posted by u/eljuandough at 2025-06-15T15:34:10Z
Before I buy this adapter ( picatinny to picatinny) does anyone know if there is one sailing on the sea? Want to side fold this skeleton brace on the CZAR
The Ark @fosscad.io Ftn...
Originally posted by u/lackofintellect1 at 2025-06-15T12:45:47Z
Cannot decide between jb welding my thread adapter or epoxy. Wich have worked better for you? Ive seen gas leaks past the thread on both 9 and 22. My thought is that the epoxy is too thin possibly and not properly sealing, but running out? Wanting the best outcome after a 60 hour print lol.
The Ark @fosscad.io First good print(?)
Originally posted by u/RelationshipNo_69 at 2025-06-15T11:28:31Z
Long time lurker, first time poster (I know that’s probable cringe) This is the second time I’ve tried printing a bottom, but this time I used an X1C and I’m amazed at the quality.
Is this print decent, or should I try to dial it in a little more?
Print Settings:
- 0.12mm layer height
- 100% infill
- 6 outer layers
- supports enabled; printed rails down
The Ark @fosscad.io Need some help, Sig P224
Originally posted by u/InterestingGarden600 at 2025-06-15T09:51:34Z
So there’s a magazine sleeve for the 224 and it’s incredibly important and also apparently hard to find. Is there some way a person could 3D print the mag sleeve? How how would they go about it?
I’d be willing to pay if someone was up to the task. If you want a photo pm me and we can talk
The Ark @fosscad.io Harlot
Originally posted by u/Some-Ad-385 at 2025-06-15T09:09:37Z
The Ark @fosscad.io can anyone recommend a model similar to the pm 4 centerfire in 9mm?
Originally posted by u/SecretarySlow8748 at 2025-06-15T06:45:28Z
title
The Ark @fosscad.io First finished print from ender 3 pro.
Originally posted by u/thehumanvirusttv at 2025-06-15T05:09:50Z
Probably gonna get flamed in here but I think this turned out pretty well for getting my first printer Monday this week and after some tweaking I got it down with no strings. Next is a chairmanwon classic or coral stipple build. But this I think it turned out decent. What do you guys think.
The Ark @fosscad.io FTN3
Originally posted by u/lackofintellect1 at 2025-06-15T04:31:54Z
[removed]
The Ark @fosscad.io Basic 26
Originally posted by u/Alexis45_ at 2025-06-15T04:17:49Z
The Ark @fosscad.io MP17 help
Originally posted by u/Objective_Care_9401 at 2025-06-15T04:06:38Z
Anyone that has printed the ACWY MP17 chassis please share your orientations for your prints. Having some supports issues getting in the way of a lot of the places moving parts need to be specifically on the upper chassis
The Ark @fosscad.io Print, Shoot, Reheat the Nozzle: A song about 3D printed firearms
Originally posted by u/lostinthesauceband at 2025-06-15T03:56:44Z
The Ark @fosscad.io P.R.O.O.F airgun bearings?
Originally posted by u/Mikeplayz09 at 2025-06-15T03:52:15Z
I have all the parts for the proof in my amqzon cart but I can't for the life of me, figure out what the bearings thay are called for, for (1/4 & 25 cal) the part kit dosent include bearings which confuses me even more. I searched through the instructions, but to no luck. Anyone got any thoughts?
The Ark @fosscad.io Has anyone done a ar15 lower from PPA-CF?
Originally posted by u/SpecialistCheek6207 at 2025-06-15T03:02:55Z
Picked up my first ar and a kg roll of ppa-cf. Printing on a bamboo labs printer. Was wondering if anyone else has done it. All the testing for the filament seemed like it would be a good match.
The Ark @fosscad.io BALR B1 - Alternate Parts :: Left Handed models :: Split-Piece Models for smaller printers :: Standalone grip+stock :: Picatinny brace/stock Rail Adapter
Originally posted by u/NopeNotRightNow at 2025-06-15T03:01:31Z
Assortment of alternate parts, which were requested by various people for the BALR Beta Version 1
Left handed parts
Split-piece parts for long models that didn't fit on smaller printers
Standalone grip and stock model
Picatinny rail adapter to use with braces and stocks that can fit such an adapter
u/nihilnonce · 2023-11-29 00:20:59 UTC · score 4
I think Gatalog released the original version a few months ago. This was a remix I found sailing the sea, released beginning of Nov.