Keeper of the Ark.
The Ark @fosscad.io Are there files for this?
Originally posted by u/PrintingGats at 2025-06-05T13:35:21Z
Anyone know of any files for this or so something similar? Saw on X today and it looked like a project we may have on here
Source: https://a.thumbs.redditmedia.com/IfPTSM-4FAZ7YF8a9R9Y-LzYayit55aSVT0akUGrwi8.jpg
The Ark @fosscad.io Lorcin L32 Finally Reliable.
Originally posted by u/Personal_Rate4943 at 2025-06-05T13:07:10Z
Eureka! All thats left is to work out a few tolerence issues and shes smooth sailing.
The Ark @fosscad.io 3D g26 frame with 3D rails ?
Originally posted by u/Dr_mac1 at 2025-06-05T13:02:40Z
I have a file for a g26 with rails . Not sure how the g26 22lr conversion slide system would work with such a file . Appreciate input .
The Ark @fosscad.io Db9 reinforced
Originally posted by u/BridgeKeepColor at 2025-06-05T12:43:36Z
2 issues. Obviously frame cracked. First time it happened when I went to lift the gun by the grip after adding additional weight from a milsurp sten mag there is also a heavy uh-1 optic. I then did my own jb reinforcement inside the fcg pocket and jb welding the grip right to the frame. I think it failed the second time because of oil not letting the jb adhere. Failed right away when I went to shoot the second time shit a few hundred more anyways. After this happened I had a flashback recolection of reading that the Magpul k+ grips tend to break the db9. Did I dream that or has anyone had the same issue? Printed a second frame a little hotter(first printed colder for less gloss) but want to make sure I mitigate another failure. Second issue is the round lodging horizontally. I had about 400 rounds on my JC upper and most mags wo
The Ark @fosscad.io Py2a g21 mag is too loose and falls out when the slide comes forward
Originally posted by u/Klutzy_Ear_3897 at 2025-06-05T12:22:00Z
I’ve been troubleshooting my py2a g21, every time the slide comes forward the mag falls out and I can also pull the mag out very easily, I have 3 magazines and they all do it. Ordered a new spring and mag release but they are both oem glock, anyone had this problem before? If I push in on the mag release from the back side it holds them in perfectly but it just doesn’t seem like it’s keeping enough tension on the mags py2a g21 lower printed in polymaker asa
The Ark @fosscad.io Help Me Modelers Please! Hellcat Pro
Originally posted by u/LowLifeScum2Society at 2025-06-05T08:17:11Z
OKAY, So I am here out of desperation and am in dire need of someone who knows what they are doing. There is no community what so every for the HC Pro in 3d Modeling and I want this to be tricked out so bad but I am not a modeler what so every. I am trying to come up with a model but struggling so hard. Can someone please help me get this made for my HC and if someone could also help me get a 4rnd extender made that would be awesome i tried the one file I found for one but didn't work at all. Here's a pic of what I made and Here's a pic of what I want it to be
 had just today sent me a message request asking about making some parts for the M1337, and I fat-fingered the "ignore" button when trying to open it to reply. Big sorry man, if you see this try and message me again.
The Ark @fosscad.io y'all ever just build stuff in TinkerCAD just cause?
Originally posted by u/Upstairs-Panic-1027 at 2025-06-05T06:53:47Z
it satisfies my ADHD for awhile..
The Ark @fosscad.io Underbarrel shotgun
Originally posted by u/Educational-Cup6427 at 2025-06-05T06:38:49Z
So I was wondering could someone use the system for the liberator 12k but smaller to make a single shot revolver style 3d printable underbarrel shotgun
The Ark @fosscad.io P2B-EZ Set Sail!
Originally posted by u/DecimalPoint- at 2025-06-05T06:03:58Z
Pic/1913 rail to buffer tube adapter FIXED cause there's 100 folders out there.straight tube, 10 degree, and 20 degree have been made. yes 20 degree is for shits and or giggles you decide which. can find the latest release on GunCadIndex and sailing the sea.Next will be stocks and braces! 2 prints 2 screws 2 nuts and 1 spring its not rocket science!
Source: https://b.thumbs.redditmedia.com/yW2ZqDJVKdvRWar35i9qE3uImVVOEYx2ZhJzEfc6rVg.jpg
The Ark @fosscad.io Oem style 43x in Glow-in the dark
Originally posted by u/lordsada at 2025-06-05T05:30:36Z
Yes i know there is no real practical use for it and it will probably shatter but I like that it looks good
Source: https://b.thumbs.redditmedia.com/ww2Jue0hs27-CsXPrO9bDYQV0AsaWtkdx4vMpPdV50Y.jpg
The Ark @fosscad.io …. 😭😭😭😭😭😭
Originally posted by u/Forsaken_Land_3700 at 2025-06-05T05:22:51Z
Source: https://b.thumbs.redditmedia.com/uiI2N9qOtMNq0ixyP8r0zObwZ-Mg6VZoefzL7aML3NI.jpg
The Ark @fosscad.io Metal barrel nut on printed upper?
Originally posted by u/MezzanineMan at 2025-06-05T04:34:00Z
I'm building a DeAR22 upper, and realized I had a spare barrel nut lying around. I'm very tempted to use it, but do y'all think there could be issues down the road with a metal nut on printed threads?
The small bit I know about material science makes me a bit afraid to do it given the hardness difference, but not smart enough to know if it's substantial enough to be a problem
The Ark @fosscad.io Tree Support Settings (Orcaslicer)
Originally posted by u/yungdoody6 at 2025-06-05T03:55:42Z
What is your tree support settings? My prints are ok but I want to make them look 100% better now with Tree supports
The Ark @fosscad.io But help make the charger
Originally posted by u/barbanegra07 at 2025-06-05T03:29:31Z
[removed]
u/Remarkable-Sock-6395 · 2025-04-03 15:58:07 UTC · score 1
u/MakeItMakeItMakeIt Did you make this test file? if so, putting a 45 degree wedge under the 90 degree overhand on HALF of the bottom side, would be a HUGE bonus. I'm getting good "flat" interfaces but on angles it's still coming out a bit rough.