Keeper of the Ark.
The Ark @fosscad.io I have a few questions about a super safety. Specifically, what is the highest quality brand you can get on the market
Originally posted by u/Howtheballs at 2025-06-03T23:20:57Z
I also have a few questions about what is the highest quality drop in trigger you can get in the market when cost is not a problem. And the less the weight of pull for the trigger, the better As it will mostly be used in semi auto for accurate shooting and not super safe. I don’t mind if modifications needed to be make the expensive drop in trigger work with a supper safe. It would be nice if somebody made a titanium super safety or even a tungsten super safety. Having a fully titanium upper would be nice as well, but I’m not that rich.
The Ark @fosscad.io AS Designs Steyr Aug "project abandoned"
Originally posted by u/Yebache at 2025-06-03T22:41:35Z
Just noticed on AS Designs production status page that they've put in there "Project Abandoned" under Steyr Aug SS.
Anyone have more insight into this?
The Ark @fosscad.io Camo net spreader disks
Originally posted by u/tacticalforge at 2025-06-03T22:08:31Z
[removed]
The Ark @fosscad.io This was gifted to me , should I run it like the usual pla or something else? Feel silly asking this
Originally posted by u/-250smacks at 2025-06-03T22:02:19Z
Source: https://i.redd.it/hcjtgw3obs4f1.jpeg
Source: https://b.thumbs.redditmedia.com/sedpt6A74z09HPkmim7JtIHnGDV9zebAIkH_i_-uAvE.jpg
The Ark @fosscad.io hd22c ( trying some different fore-grip designs) fyi blue threads into gray barrel nut
Originally posted by u/FE0NIESasH0BBIES at 2025-06-03T21:49:57Z
Source: https://i.redd.it/oigdvybh9s4f1.jpeg
Source: https://b.thumbs.redditmedia.com/T-x-L3XQ4RsJPYgryhWNB1NbNB_kBZEv3lkeJzYo73Y.jpg
The Ark @fosscad.io Camo net Spreader Disk
Originally posted by u/tacticalforge at 2025-06-03T21:49:20Z
[removed]
Source: https://b.thumbs.redditmedia.com/lheehHCYldZg05q5XTtaPveZNRpzqYhiKc19NsOdkBc.jpg
The Ark @fosscad.io Task failed successfully Print failed. But finished anyway.
Originally posted by u/Helagak at 2025-06-03T21:43:13Z
Source: https://i.redd.it/4ylx3vmw7s4f1.jpeg
Source: https://b.thumbs.redditmedia.com/a9nkdaiKDvc6yPHmos9oUblNwxqY6Xu8k7u0UuL1Z3g.jpg
The Ark @fosscad.io What am I doing wrong
Originally posted by u/Hypocritesville at 2025-06-03T20:37:47Z
[removed]
Source: https://i.redd.it/khazz11mwr4f1.jpeg
Source: https://a.thumbs.redditmedia.com/Rj2QbBpIrR-aYpi_L6E38X0EyKfJmZ2g6F5E11oO1m0.jpg
The Ark @fosscad.io Strike Industries Mass Driver
Originally posted by u/No-Jicama5184 at 2025-06-03T20:28:40Z
[removed]
The Ark @fosscad.io Leber V2 plate issues....did SCS screw this up?
Originally posted by u/Abject-Ad-629 at 2025-06-03T19:44:12Z
So I ordered some plates for my Leber V2 build from SCS.
When I got them today I tried the jig and it was too wide to fit.
I measured the jig and it was 17.33mm which matched the step file.
I measured the top and bottom of the bend on the plate. The bottom was 16.82 mm and the top was 17.90 mm (which could have been pushed out from me trying to insert the jig).
All the holes on the plate look strait and it fits into the my leber lower just fine.
So is this an issue or can the plate still be used?
I made sure my settings matched what was in the documentation. I doubled checked and I did select 0.074 (1.9mm) and even measured it and what I was sent is around 1.85-1.89 mm thick.
Source: https://a.thumbs.reddit
The Ark @fosscad.io Guess the error
Originally posted by u/RobbbyRay at 2025-06-03T19:43:45Z
This *was a Glock 19 gen 5 by PY2A
If you can guess the error without context. I will buy a set of rails to be sent to you.
(It was figured out and fixed)
The Ark @fosscad.io Some pics of my first two prints- Chairmanwon G19 and Fannyblaster lowers
Originally posted by u/_hyperotic at 2025-06-03T19:41:25Z
Source: https://b.thumbs.redditmedia.com/87dUSQzFbXVj6a1EH380obpS5DG0YGfdtUNoYZzTtXk.jpg
Source: https://i.imgur.com/EgpRevx.jpeg
The Ark @fosscad.io leber v2 plate issues...did SCS screw this up?
Originally posted by u/Abject-Ad-629 at 2025-06-03T19:39:10Z
The Ark @fosscad.io Rogue 9 bolt length
Originally posted by u/VisitorFromOuterSpac at 2025-06-03T18:26:09Z
Anyone knows how long the bolt has to be the manual says 250 mm is enough for three bolts so this divided by three is the bolt length or what?
The Ark @fosscad.io Allias Receiver
Originally posted by u/SnooEpiphanies353 at 2025-06-03T18:12:00Z
Final prototype for my NeoMag Allias Receiver. Next step is PET-CF and getting it mounted in my truck. Saving me $35 each receiver (excluding shipping). Curious if anyone would like to see it on the sea
Source: https://b.thumbs.redditmedia.com/kk4Y8wI_cIXLQP_0P8h3nCRIxkPngAtK9Ne_cFj8lVg.jpg
The Ark @fosscad.io Picatinny Mounted Folding Buffer Tube Sailing (Remix of LWD MCX Folder)
Originally posted by u/Hurley_Welding at 2025-06-03T18:01:26Z
Hope this could help someone who needs it. HWW on the seea. Includes buffer tube to pic adapter, hinge, button, and the buffer tube replica tube thingy.
Source: https://a.thumbs.redditmedia.com/hPZJj4cRtY8cHLhmjIXZAO-Rc2h0_DzI18ao7WjlPe4.jpg
The Ark @fosscad.io thREEVOLVER beta
Originally posted by u/ImposterArms at 2025-06-03T17:36:31Z
One shot at a time. Three chances to make it count. The thREEVOLVER is now in Beta with The BLC from Imposterarms and Joe Dirt. The thREEVOLVER utilizes Joe Dirts JD12 framework and firing system to create a unique pepperbox style hand cycled revolver. Rocking a trio of Bersa barrels in 380ACP with planned more caliber/barrel options in the works. Hit up the BLC for more info or to get involved with testing. One shot at a time. Three chances to make it count.
Source: https://b.thumbs.redditmedia.com/0RMAL-rpKG2tyCfOHML5ZwCkBLp2_mYpuHYch2GT-iU.jpg
The Ark @fosscad.io Suggestions for slide release not fitting with gspot lever?
Originally posted by u/Aloha0428 at 2025-06-03T15:02:00Z
A friend of mine printed a 17.3 frame and is having trouble fitting the slide release in with the metal gspot trip. Any suggestions I can tell him? In theory he says it'll still run without the slide release but curious if anyone else ran into this issue and has a suggestion of how to fit both.
The Ark @fosscad.io 3011 before the 3011??
Originally posted by u/rly_weird_guy at 2025-06-03T11:40:30Z
The Ark @fosscad.io Fellow autistic people, help me chose the right db frame with SS
Originally posted by u/pantlesspuma at 2025-06-03T11:22:33Z
Currently finishing up the PLAR and need another project and figured the DB alloy would be next. The problem is, there are so many files on the sea and im not sure which would fit my needs the best.
I'm looking for one that can take side plates, SS, and the aluminum tail piece if possible.
If there is betas or something coming out soon, I dont mind waiting for that either.
Thank you as always
u/D24tic89 · 2024-03-30 17:41:23 UTC · score 1
Mr jelli, would you print me one?👉🏽👈🏽🥺 i cant play with printers in my state ☹️