Skip Navigation

User banner

Grey Summit Gear

@ gsgmfg @fosscad.io

Posts
37
Comments
76
Joined
3 mo. ago

  • TURD files

    Jump

  • Which model are you using? We have PA6-CF ones with very deep Detent holes.

    Seems to hold up great.

  • SCSSS Oreintation

    Jump

  • I did 600 rounds in one weekend until I ran out of ammo. It’s been good to go since.

    Melted a PLA lever, but once I switched to PA6-CF it’s been solid.

  • TURD files

    Jump

  • What part do you find wears on the printed ones? The Detent track? Or the profile of the cam holding up the activator?

  • TURD files

    Jump

  • That’s not a 3-position one.

  • Super Safety @fosscad.io
    Grey Summit Gear

    SCSSS Oreintation

    You want the “tooth” towards the “T” on the HT logo on the small cam.

    If the Detent tracks are on the right, you’d want the tooth forward from the observer.

  • tiny-11 builds?

    Jump

  • Forgive my ignorance. What is EGP?

  • tiny-11 builds?

    Jump

  • Where are folks getting the parts kits?

    Interested in doing a sig p238 build.

  • Officially here… Removed Reddit from the phone today…

    Jump

  • Gentleman and a scholar o7

  • Officially here… Removed Reddit from the phone today…

    Jump

  • Welcome home. We've been expecting you.

  • bazaar @fosscad.io
    Grey Summit Gear

    Happy Thanksgiving FOSSCAD! - Black Friday Deals - $20 Off all FRTs! – Cheese Finger Tactical

  • FOSSCADToo Mods

    Jump

  • Now I’m curious if mentioning the Discord will get you banned too?

    Not that anyone should try and find out.

    Reddit is continuing to prove why the GCI Forum and FOSSCAD.io are needed.

    Reddit sadly is great for visibility and spreading awareness. But it sees that our conversion rate is going to be zero if we can’t even mention where to learn more about the Forum.

  • PY2A Rails? Wait Time? Can I make my own?

    Jump

  • Glad to hear they're quality.

  • PY2A Rails? Wait Time? Can I make my own?

    Jump

  • Totally fair - I put in an order on Oct 21st. Am still waiting on a tracking number.

  • bazaar @fosscad.io
    Grey Summit Gear

    Need an FRT? We got Super Safeties, TURD/Kabutos, and more!

    Hey everyone! Wanted to share what we have available for those looking to upgrade their builds with an FRT or two.

    We cater to a wide market, so for a lot of you 3D2A folks our DIY options probably would ring home the most. Granted we do have more drop-in/assembled kits at a higher price point.

    I host FOSSCAD.io from FRT sales mostly. Some folks have asked about donations, but I don't feel comfortable talking folk's money without giving something in return.

    So if you're in a legal state (see !supersafety@fosscad.io for the legality map) - and wanna support - buy an FRT today :)

    Can't stop the signal.

    Catalog

    Super Safety Kit - Complete drop-in solution available with or without pre-cut trigger. Everything you need in one package.

    ![DIY Kit](https://fosscad.io/pictrs/image/19c50bea-fc2

  • General Discussion @forum.guncadindex.com
    Grey Summit Gear

    PY2A Rails? Wait Time? Can I make my own?

    Hi Friends,

    I ordered some PY2A G19 rails a while back. Still am waiting on my order.

    Bought two of these: https://www.printyour2a.com/product-page/g19-gen-5-slim-rail-set

    Has anyone else had a long wait time?

    In the case my order craps out, does anyone else supply PY2A rails? if not, is the design open enough to cut/bend my own? I have a CNC mill.

  • Best 300 bo upper for ss?

    Jump

  • I run a .300 blk 8" Aero upper with a Nomad 30 and a Super Safety.

    It's good fun. Also LMK if you need a cheap Super Safety. I sell DIY Kits for the SCS Super Safety for $15. You just print the printed parts and I handle the metal stuff ;)

    Here is my buddy giving it a rip: https://lemmyverse.link/fosscad.io/post/29082

  • Reddit some retards

    Jump

  • o7 - Mr. Bliccy.

    Time to spread the signal.

    https://sortinghat.fosscad.io/faq/mobile-apps/

    This is a guide for people using the Sorting Hat (an app I made to divvy up signups between GCI and FOSSCAD to balance load and reduce censorship risk). It also talks about how to get a mobile app set up so you can doomscroll 3D2A shit from your phone.

    If anyone is interested in helping promote GCI/FOSSCAD or hosting additional lemmy instances to prevent censorship and takedown risk. Please DM me or reply here.

  • Featured

    [BETA] ROF Bot Testing

    Jump

  • Doing some major refactoring anyways.

    This is our current configs results over the test suite.

    Clip coverage: 37 clips across 35 RPM buckets

    • Average percent error: -0.01%
    • Std dev percent error: 16.15%
    • Average absolute percent error: 9.22%
    • Median absolute percent error: 3.01%
    • Max absolute percent error: 47.65%
  • Super Safety @fosscad.io
    Grey Summit Gear
    BETA Featured

    ROF Bot Testing

    As some of y'all may have noticed - there is a new @ROFBot@fosscad.io - I'm developing it myself.

    Will eventually open source. But it's a bit of a buggy mess right now.

    Please be patient with the bot, and take results with a grain of salt for now.

    Attached is an image you would get commented on your post.

    I'm playing around with the backend to use different strategies.

    There is this GUI that u/schlarpc made: https://schlarpc.github.io/rof-gui/

    It uses similar envelope detection, but a manual fixed threshold. It also reports the whole RPM of the clip along with mean/median burst rates. The downside to this is it caps out at a minimum spacing of 50ms per shot (~1200 RPM)

    We're taking a different approach, attempting to comb through peaks and find shot audio, while filtering out echos/ejection noise.

    It's buggy. But i've seen median error rates as low as 2% over my test data, but when it fails it fails hard.

    Long story short, bot reply might be full of crap, but all the

  • Rate of fire please

    Jump

  • It's buggy as hell right now. I've been working with OP to refine the model, but we need a better clip.

    The FAN going wrrrh in the background is tripping up detection.

    I have 3 modes i'm testing right now. Happy to share more. But I pulled a ton of clips from reddit for testing.

  • What should I build? As a first time

    Jump

  • A Gen 3 Glock 19 isn’t super hard.

    A harlot is a pretty common first build.

    Pocket Pleaser (Ruger LCP) can be fun too.

  • General Discussion @forum.guncadindex.com
    Grey Summit Gear
    www.forbes.com

    Reddit’s Cofounder And CEO Steve Huffman Is Now A Billionaire

    Apparently being anti-2A is profitable....

  • does anyone have this files

    Jump

  • Brother... that's not how CNC machines work.

    You need the CAD files... You can then generate G-Code for your specific CNC machine...

    You also can't really rifle a barrel on a mill. You'd need to do ECM or use a button...

    Buy a complete upper online. Print a frame. Buy some rails. Buy a LPK and some magazines online too. If you can't do all that, maybe this ain't for you.

  • Map of FRT Legality State by State

    Jump

  • Yeah I'm gonna update it. Good catch.

  • Map of FRT Legality State by State

    Jump

  • "Bump stock" means any device or instrument for a firearm that increases the rate of fire achievable with the firearm by using energy from the recoil of the firearm to generate a reciprocating action that facilitates repeated activation of the trigger.

    Our opinion on that is that "recoil" is the mode of operation. Hence why we sell to NJ.

    If you were to bolt the rifle to a bench rest or similar - a bump stock would not work, but a super safety would.

    Recoil is the impulse of the whole rifle backwards - not the gas system pushing the BCG backwards.

  • Super Safety @fosscad.io
    Grey Summit Gear

    Map of FRT Legality State by State

    As of Oct 27th, 2025.

    Alaska is green, Hawaii is red. Colorado is only banned in specific counties. But I only had polygon data for the whole state.

    Yellow means there is either a Bump Stock Ban, or other “Trigger Activator” Ban that specifically mentions “recoil” as the mode over operation.

    The litmus test for legality there is whether or not arresting the recoil (bolting rifle to table, etc) would disable the functionality (i.e.) like a bump stock.

    I’m by no means an authority on this, but from my research this is what I got.

    Feel free to comment/challenge any states, and I'll update this post.

  • Long Range @fosscad.io
    Grey Summit Gear

    My bolter

    cross-posted from: https://fosscad.io/post/82876

    Bergara B14 HMR (Lefty) Vortex Razor HD LHT KRG Bravo Stock Harris Swivel Bipod Triad Tactical Strap

  • Gun Porn @fosscad.io
    Grey Summit Gear

    Any love for bolt guns?

    Bergara B14 HMR (Lefty) Vortex Razor HD LHT KRG Bravo Stock Harris Swivel Bipod Triad Tactical Strap

  • 3D2A @fosscad.io
    Grey Summit Gear

    No Drill SCSSS

    guncadindex.com /detail/No-Drill-SCSSS:4

    Since we can link directly now... This is one of my favs.

  • Super Safety @fosscad.io
    Grey Summit Gear
    www.ammoland.com

    Man Faces Machine Gun Charges for Owning a Forced Reset Trigger

  • General Discussion @forum.guncadindex.com
    Grey Summit Gear
    www.ammoland.com

    Man Faces Machine Gun Charges for Owning a Forced Reset Trigger

    Bit of an update from the guy who made a post about the DC arrest.

  • Super Safety @fosscad.io
    Grey Summit Gear

    Armed Defender Research doing some field testing for us.

    Also testing to see if YouTube shorts embed properly.

  • General Discussion @forum.guncadindex.com
    Grey Summit Gear

    RIP r/GAFS - Finally locked down.

    Sad day. But at least they got a warning first...

  • General Discussion @forum.guncadindex.com
    Grey Summit Gear

    Interest in a DIY Parts Kit for the 3-pos SCS Super Safety?

    Hey friends,

    I'm writing to see if there is any interest in a DIY parts kit for the SCS Super Safety.

    Kits would be for 3-pos.

    The kit would include:

     
        
- 2x Grade 5 Titanium Wear plates (.04" + 0.06") - tops machined flat
- 2x 1.5mm 304 Stainless Steel Rods - pre-cut to length
- 1x Rounded Brass Detent Pin

    Price-wise I'm thinking $10. What do y'all think?

    It's a fun project, I've had mine working very well. This cuts down a lot of the SCS and Amazon shopping logistics.

    You'd just need a small mallet and some epoxy, maybe a 1.5mm drill bit if your printer isn't super dialed to clear out the holes.

    I'll go by the shop and take a photo of what I'm thinking.

    I also have pre-cut mil-spec triggers for sale for $20. But if you're in the DIY camp - I think I'd leave it to you for making your own cutting jig and doing your own trigger.

    I could ostensibly include an uncut trigger for another $10. But I'm not su

  • Reloading @fosscad.io
    Grey Summit Gear

    Best Beginer Equipment to start?

    Reloading is the one part of the hobby I haven't jumped into.

    My EDC is a .38 special.

    The other calibers I have in my collection are: .300 blk 5.56 NATO .308 Winchester 9 mm .45 ACP .22LR (Don't plan on reloading) 12 Gauge

    Probably picking up my first .32 ACP soon

    I've read a bit about progressive presses versus single stage.

    https://www.dillonprecision.com/s000082

    This seems like a do-it-all choice. But very pricey. Out of my budget by far.

    Any recommendations for something a bit more conservative?

  • Super Safety @fosscad.io
    Grey Summit Gear

    I'll go first then...

    Let's get this party started!

    .300 blk 8" Nomad 30 H3 Buffer Weight, Standard Spring

  • Super Safety @fosscad.io
    Grey Summit Gear
    Featured

    Greetings, Redditors!

    Howdy - hope you all are adjusting to your new SuperSafety home!

    Context

    Share the news before r/SuperSafety get's the ban hammer. Reddit says their new rules go into affect today. So time is of the essence!

    @GassyNizz@fosscad.io and @correctzucchini821@fosscad.io are some familiar names who are going to be helping mod around here.

    Please reply here or in !meta@fosscad.io if you have any Lemmy specific questions!

    Happy you are all here!

    We will work to get Vendor flairs, etc. moved over in the coming days, but for now we just need numbers and that sweet sweet Super Safety content.

    In the meantime, make sure you sub to !SuperSafety@fosscad.io and check out some of the other communities listed here.

    If you're interested in getting a mobile app, check out this guide: https://sortinghat.fosscad.io/faq/mobile-apps/

    EDIT:

    To get this feeling more like reddit, highly

  • meta @fosscad.io
    Grey Summit Gear

    Are you from Reddit? Click here first.

    Welcome to Lemmy. You did it.

    As you may have heard, Reddit is updating Rule 7 of its Content Policy on October 9th 2025.This change bans user-to-user transactions and discussions involving firearms, ammunition, parts, and related accessories — including 3D-printing files, suppressors, triggers, conversion kits, and similar components.

    As a result, many 2A-related subreddits are being banned or forced to change.If your community has been affected and you’d like to rebuild it here on Lemmy, welcome aboard.

    🚪 How to move your community here

    If you’re a Reddit moderator or community member looking to migrate:

    1. Reach out to the instance admins or message the mod team here for setup help.
    2. We can assist in creating a new community, preserving flair rules (soon), and redirecting your members.
    3. Use pinned posts or mod-approved announcements to link your existing audience to the new space.

    🔗 Subreddit → Lemmy Community

  • meta @fosscad.io
    Grey Summit Gear
    sortinghat.fosscad.io

    Sorting Hat - FOSSCAD Lemmy

    I've created a website to help distribute new users across multiple FOSSCAD instances.

    The goal is to reduce censorship/takedown risk and to encourage federation which keeps our content and information safer.

    If you're going to post about GCI or FOSSCAD's new home on Lemmy, using this link helps prevent us from creating a Single Point of Failure (SPOF) for future take downs.

    Don't be a SPOF. Use the hat.