Keeper of the Ark.
The Ark @fosscad.io Interesting. Filament
Originally posted by u/Agitated-Werewolf846 at 2025-06-22T01:02:24Z
Just saw an ad for this on Facebook. It seems very impressive, although a little little demanding in terms of the heat needed to print it was wondering if this would be good for a nylaug as well as other 3D printed components like frames and receivers
The Ark @fosscad.io Hd22c build question, what hand guard do I use with the skinny v3 lower? There’s 2 holes in the bottom of the lower but don’t see any in the hand guard
Originally posted by u/-250smacks at 2025-06-22T00:12:50Z
The Ark @fosscad.io Any idea for improvement?
Originally posted by u/Spiritual-Host2600 at 2025-06-22T00:02:58Z
The Ark @fosscad.io More DeAr22 supersafe fun
Originally posted by u/souporlouis at 2025-06-21T22:56:35Z
Blew through another 200 rounds today but can't hit shit..noticed the can and barrel are moving quite a bit. Gonna torque down the PLA barrel nut, hopefully it doesn't crack
The Ark @fosscad.io AR22 Tower for deAR22 Drum V2 Out Now
Originally posted by u/Ok-Blood8662 at 2025-06-21T22:48:58Z
Moved the tower feed lips to the rear 2.5 mm, and made the fitment less tight to accommodate a wider range of lower receivers.
Thank you to those that tested the model and provided feedback. Any more issues, let me know.
The Ark @fosscad.io Build/Range Review - Finally Fixed FN FiveseveN remix (no safety)
Originally posted by u/Vivid_Database551 at 2025-06-21T22:09:51Z
So I finally started on my journey outside of glock-world and put together a FN 5.7.With the hammer pack and slide already assembled, Id say this build is much easier than a glock.But then again, a glock is pretty straight forward as it is.Nonetheless I would rate the build difficulty at a 5.
1 very easy, 10 very difficult.
Outside of the printed frame(sunlu pla+ 2.0), the only printed part I used was the slide takedown lever.The printed slide lock/release button didnt want to stay attached. Even withusing super glue. So I just used the button that came with the kit.. Along withsome super glue, as even that button wouldnt stay attached to the slide lock lever.
When I took the completed frame to the range, it took about 20 rounds or so forthe thing to cycle properly. After
The Ark @fosscad.io Bamboo lab A1, help which cutter to use? Orca slicer - bamboo studio - cure ?
Originally posted by u/Dramatic-Music-7886 at 2025-06-21T22:00:18Z
I just bought a bamboo lab A1 that
The Ark @fosscad.io Help with diagnosing pa6-cf issues
Originally posted by u/nuts_and_gum_TAL at 2025-06-21T21:44:08Z
Hi all,
Making my first attempt at printing pa6-cf and could use some help troubleshooting. I've printed many pieces with my P1S using Overture PLA+ and always get perfect results. I'm attempting to print Polymaker PolyaMide PA6-CF and getting some of the worst print failures to ever come out of my machine. My filament dryer (never dried any of my PLA+) is an air fryer, and I'm printing out of a polymaker dry box with dried silica packets inside (the built in hygrometer reads at a very stable 10%). I'm printing with a recently upgraded hardened steel 0.6mm nozzle and hardened steel extruder gears.
Details: The first picture is an organic support test file printed after drying for 20 hours (over several days, not continuous - I never opened the air fryer during this period) at 170º F/76º C. My air fryer
The Ark @fosscad.io Pen-15 is Coming soon
Originally posted by u/thee_Grixxly at 2025-06-21T21:22:46Z
Print Gunner has the hottest new project of the summer that is perfectly average sized. Entry level launcher needing only a very short list of hardware that you probably already have! Start your journey into signaling devises and grab your Pen15!🫡
The Ark @fosscad.io 3 position ak super saftey
Originally posted by u/ReptiIemilk at 2025-06-21T21:21:17Z
Have y’all seen these 3 pos SSAK’s? I wonder when they’re gonna release.
The Ark @fosscad.io Ruger EC9s
Originally posted by u/Empty_Piglet_292 at 2025-06-21T21:02:11Z
Scored a nice EC9s parts kit that has everything but the FCU. Has anyone worked on a ECU for these yet? I've got one to pull measurements off of and figure I might try and give it a go. Only issue is I suck at CAD only due to inexperience this might be a tough project to learn on I guess we only live once though lol.... but if anyone has already got a start on this I would sure be greatful of advice and resources.
The Ark @fosscad.io PSA ar-v
Originally posted by u/Dependent_Stretch_16 at 2025-06-21T20:46:55Z
Hey hey I’m trying to track down a stl for the palmetto state armory at-v lower receiver! If anyone knows of one or if anyone is interested in designing me one I’d be forever grateful. I’m not super new to 3d printing but I have never really messed with designing at all. It’s a whole other skill that hasn’t been necessary for me to learn till now and I’d really love to avoid it because it seems extremely time consuming for as little as I would design personally!!
The Ark @fosscad.io Look what they need to mimic a fraction of our power
Originally posted by u/MOOKAJAMS at 2025-06-21T20:33:54Z
The Ark @fosscad.io Every time I rack it back it it doesn’t reset or the trigger goes on it own
Originally posted by u/Ok-Mathematician3719 at 2025-06-21T19:21:32Z
Don’t know the problem
The Ark @fosscad.io Aug super safety trip
Originally posted by u/Brutox62 at 2025-06-21T18:55:55Z
So a couple days ago I started making an aug ss. Everything printed well but, I ran into an issue. As you can see in the picture the trip doesn't sit flush and flexes when I put it on my bolt. Now to make sure I printed another one and same issue flexes and the holes for the rods are too small. So I ask has this happened to anyone else?
The Ark @fosscad.io Has anyone reup'd ftn.4 without built in supports?
Originally posted by u/Somebodysomeone_926 at 2025-06-21T18:39:52Z
Cant seperate the printed piston ones in the slicer for some reason. You can with the diy one tho
The Ark @fosscad.io Lock Pick standard stock conversion rail.
Originally posted by u/Apprehensive_Tap4837 at 2025-06-21T18:37:04Z
With the idea of making the 1022 Lock Pick as modular as possible I've drafted this simple conversion rail that allows you to run your Lock Pick in any standard 1022 stock.
You can also rail mount or use the stand alone that's already on the sea.
Speaking of I'm putting the final touches on a v2.0 standalone and chassis that eliminates all hardware and pints as one part. It also eliminates the possibility of flex by inletting the rear of the chassis to slide farther rear ward and hold the stand alone securely. V1.0 has the classic looks but v2.0 is smaller, stronger, and more versatile.
The Ark @fosscad.io 0.4mm nozzle with 0.1 layer height?
Originally posted by u/SimilarPriority7075 at 2025-06-21T18:32:33Z
Has anybody tried? Using Creality k1c
The Ark @fosscad.io sloppy seconds does anyone still have the stl
Originally posted by u/kami3kadze at 2025-06-21T17:41:29Z
as the title says because i can't find the stl anywhere anymore i guess pembi took it down from odysee
The Ark @fosscad.io Anyone built FGC-9 and have tips
Originally posted by u/Ok_Sample5582 at 2025-06-21T17:40:43Z
Also, did they call me a sour puss? Lol. Im excited. Fast shipping, my second order from these guys and gonna be alot more.
u/Zee705 · 2024-05-10 10:20:32 UTC · score 8
Ummm... what?