Keeper of the Ark.
The Ark @fosscad.io Power went out will an hour left on the print so I tried to save it. Suboptimal.
Originally posted by u/garretcompton at 2025-06-30T04:23:52Z
Working on a Masterpoint and 10 hours into the print I had a power outage. Tried to restart the print at work and checked on it only to see a major layer shift. Figured I’d have to reprint it anyways, but still sucks.
The Ark @fosscad.io New project nagging the back of my mind
Originally posted by u/AIR_CTRL_your_moms at 2025-06-30T04:03:23Z
So I’m looking to play with some kydex and make a few holsters.
I’m looking for 1:1 non-functional copies of the most popular pistols. I found a few from hunteroftheyellowdog, but do you all have any recommendations?
I’m not sure if this is the correct forum for the question, but it seems like the best place to start since I plan on printing the copies.
The Ark @fosscad.io Db9 alloy vs ssszar
Originally posted by u/Dramatic-Grade-55 at 2025-06-30T03:58:38Z
Just finished up an ubar x build and can't decide if I wanna do a db9 alloy or a ssszar, any input? Thanks in advance!
The Ark @fosscad.io Null22 help
Originally posted by u/MasterBlasterJa at 2025-06-30T03:51:27Z
Looking at printing the null22 but I was wondering if I can buy an actual barrel or if I have to make one. Also is there any assembly instructions or videos anywhere, also a list of where to get all the parts needed to fully assemble. Thanks 😊
The Ark @fosscad.io Misc (Junk) Parts Lot With High Bid: Anyone Know Why?
Originally posted by u/HotCommunication2855 at 2025-06-30T02:12:57Z
Gunbusters does misc parts lots weekly of what seems to be all the leftovers that didn't sell. Usually a lot of revolver parts, some barrels, and rifle bolts. Sometimes random handgun slides etc
I've see some eventually go for $200-250 but this week's lot is at $480 in the first few hours. Any experts can tell why? On GBroker search "1097705828"
The Ark @fosscad.io Noob 3dP90 question
Originally posted by u/EducatedApe98 at 2025-06-30T02:12:04Z
I am looking for advice for a beginner. I have 3d printing experience and experience using firearms but not building them. I am interested in making the 3dp90 but am unsure on the feasibility and all the required parts you need to purchase/modify. With the guides to files are the instructions easy to follow and the parts easy to source and install? Am I biting off more than I can chew with this model and is the a more beginner friendly PDW I can start with? I am not interested in the Glock clones even though they seem to be the simplest. The P90 is just so nostalgic and feels like a fun project. Also could someone give a ball park cost I should except? TIA
The Ark @fosscad.io Pen15 Parts
Originally posted by u/thee_Grixxly at 2025-06-30T01:48:44Z
Prepare for launch 🚀
The Ark @fosscad.io Pen15 Parts
Originally posted by u/thee_Grixxly at 2025-06-30T01:38:46Z
I’ve got a few kits available before the release of PrintGunners Pen-15! Grab your Pen15 parts and prepare for launch! 🚀
The Ark @fosscad.io Anybody with shaped charge files?
Originally posted by u/East_Contribution825 at 2025-06-30T01:04:34Z
[removed]
The Ark @fosscad.io G17 / G34 troubleshooting question
Originally posted by u/lickmenorah at 2025-06-30T01:03:44Z
Hello. I’m new here, and somewhat new to this scene. I have a fully working G19 FMDA build, so I wanted to build a G17 / 34. I have the frame and lower parts assembled, but for whatever reason, this slide (ROCK SLIDES G34 GEN 3) will NOT slide into the frame. Even if I lower the slide release pull tab when trying to get it on, it will not pass and will not load onto the frame. On two occasions, I got it onto the frame by priming the trigger before hand (no idea why this mattered or helped) and then I could not get the slide back off; even with the slide release tab being pulled down. I had to disassemble the whole lower to get the slide off the rails. When it was on the rails fully one time without priming the trigger, when I cocked it back, it did not prime the trigger and there was no action. The only thing I can t
The Ark @fosscad.io P322 Hot Pocket Remix
Originally posted by u/Thefolsom at 2025-06-29T23:58:49Z
Modified the Hot Pocket by Middleton Made to better fit the p322. I additionally made a few changes to simplify the print, as well as add a rear, removable cross bar for additional support and to prevent the chassis from sagging.
I also modified the Sauerkraut V1 to utilize an AR-15 style buffer tube so you can put adjustable braces on it, supporting 4 positions.
I plan on posting the buffer + steady brace soon, but still doing some testing on the p322 chassis.
The Ark @fosscad.io SL-15 V4.8.A Beginner Guide
Originally posted by u/BinarySoak at 2025-06-29T23:16:29Z
Brand new to 3D printing. I'm using Polymaker PLA Pro, and a Qidi Q1 Pro. I have both Orca and Prusa. I've read through Hoffmans SL-15 docs, but am still a bit confused.
I guess my question is: once I have my printer temps/settings right, can I just load the lower file into Prusa and begin printing? I understand Hoffman mentions a lot of advanced settings in the docs, but was wondering if those are automatically preset in the file?
As a member of other niche communities I'm fully aware of the cringe status of this post. I don't want to start somewhere more simple, I bought a printer specifically for these lowers.
Any valuable input highly appreciated.
The Ark @fosscad.io Ar15 lower with window for trigger
Originally posted by u/chaos241 at 2025-06-29T21:56:41Z
I've seen some lowers that people have made that have a window to see the trigger to help trouble shoot the trigger functioning with an frt. Ive searched odysee and nothing came up. any help is appreciated.
The Ark @fosscad.io Need some help with light primer strikes!
Originally posted by u/FrostingOwn2476 at 2025-06-29T21:48:21Z
Tried three different brands of ammo and they all had light strikes. Only managed to have two fire before the light strikes happened. Any advice on how to diagnose and fix the issue appreciated.
The Ark @fosscad.io I need a name please.
Originally posted by u/Apprehensive_Tap4837 at 2025-06-29T21:38:21Z
Since you guys named my first mix you can do another.
This is a left handed VSG that will hold 5 rounds of supressed subsonic .300 blackout. This is a remix of one of his mounts modified from the 26mm launcher and his left handed vsg.
I could use some beta testers to help me refine this file. I have some voids I'm having issues eliminating.
The Ark @fosscad.io G19.5 magwell?
Originally posted by u/gunzrcool at 2025-06-29T21:36:24Z
Is there a file floating around for a printable g19 gen 5 magwell?
Searched the seas but no luck, although the search there seems to not be the best.
Thnx
The Ark @fosscad.io Anyone tested the mantis yet?
Originally posted by u/MrFartyStink at 2025-06-29T21:34:20Z
Iv seen a few posts about it just wondering if anyones put more rounds thru it. I see a beta file from then and the v1.1 he uploaded 5 months ago im guessing the most recent is the best file. Ik the scarab v2 is well tested but does this also live up to the scarab v2 longevity since its a remix?
The Ark @fosscad.io 15mm Smoke Projectile Ignition Issue
Originally posted by u/IHitCircle at 2025-06-29T21:33:16Z
As the title says, I got around to testing some projectiles, and I made a smoke mixture to put in the projectiles. I'm using KNO3, Powdered Sugar, and Mineral Oil and the mixture burns/smokes great.
But using a visco fuse (stolen from fireworks) inside the projectile doesn't seem to be igniting the mixture fast enough. Does anyone have any tips or other fuse options that may burn a bit slower, so the mixture actually burns? Or is there something that I'm missing?
The Ark @fosscad.io Best PCC to print for me.
Originally posted by u/Kestrel1000 at 2025-06-29T21:28:59Z
Just got a 3d printer and am pretty invested in printing my own pcc. There are a few requirements,
Has to take glock mags. (have A LOT of them) Can be suppressed Bufferless Has the ability to have a SS. (This requirement isnt the biggest because I do plan on doing designs of my own to provide to the community)
Anyways I did look online about different pcc but everytime i dug deeper it seems like there are more than I thought.
So far I like the db alloy, rogue 9, and mod9. But since you guys know way more than me since I am starting out i would appreciate a pretty good list with all my requirements.
The Ark @fosscad.io Anyone know of any good m&p 2.0 45 full size frames?
Originally posted by u/dxscxnd98 at 2025-06-29T21:13:33Z
Is there any full size m&p 2.0 45 frames out there anywhere? Having trouble finding any.
u/Individual-Grade3419 · 2025-04-07 09:51:24 UTC · score 1
songname?