Keeper of the Ark.
The Ark @fosscad.io Opinions on Cody Wilson
Originally posted by u/jack1ndabox at 2025-06-29T21:03:25Z
Was just wondering what you guys think of Cody Wilson, other than his political ideas or the fact that he was the catalyst of the 3d printed firearms movement. I recently listened to 2 interviews hes done and he seems like he had a massive ego at minimum, and possibly a messianic complex. He says things that make it clear he thinks he's "the father" of 3d printed guns, "indispensable", and other odd stuff. He very clearly thinks he's the coolest guy in the room but acts like a chud. I recognize he did some important things with the liberator and ghost gunner, but I have a hard time believing someone else wouldn't have made either one of those things on a similar time scale. That's the feeling I've gathered but wondering if you guys agree or disagree?
The Ark @fosscad.io Sw9g not firing with mag in
Originally posted by u/IdenticalTwinTurbos at 2025-06-29T20:55:12Z
Anyone have an idea why my sw9g isn’t firing with the mag inserted? Trigger moves all the way but won’t fire until I take the mag out
The Ark @fosscad.io First working build
Originally posted by u/Special-Character371 at 2025-06-29T20:49:06Z
Hey I actually followed through on something and built a Glock 17 with a parts kit and complete slide from JSD Supply. Printed with Polymaker PLA Pro in Olive Green on an X1C. I liked the results so much I printed a second with Elegoo PLA Pro in white and I’ll be finishing that one when the other kit arrives.
The Ark @fosscad.io Dirte Dozen update
Originally posted by u/JoeDirt1560 at 2025-06-29T20:37:06Z
The beta for the Dirte Dozen(formally JD 12) is going good. It's a 12ga break open shotgun made with common hardware and can be made simple hand tools. Cost @ $75. The metal L brackets have done well in adding strength and none of the builds have had any frame failures during testing. Now there is a double barrel version that needs some testing then we can set sail.
The Ark @fosscad.io Under barrel VSG
Originally posted by u/Apprehensive_Tap4837 at 2025-06-29T20:24:07Z
I'm picturing a very short barrel supressed bolt action .300 blackout.
I'm probably going to do a short action 9mm as well but unless I have a clever idea to slice in a glock mag or something quickly ill just craft it as a single shot with a sled so you just drop the 9mm in the side and it chambers similar to a bench rest rifle.
The Ark @fosscad.io pla+ or PA6-CF
Originally posted by u/Significant-Fold862 at 2025-06-29T20:02:04Z
ik there pros and cons and i feel like majority will lean to pa6 but i got pla+ on plans for ar lower reviver print. should i just order pa6 instead or will it be just fine using pla+
The Ark @fosscad.io N99 Update
Originally posted by u/A7_Curio at 2025-06-29T19:46:57Z
The Ark @fosscad.io Dirte Dozen
Originally posted by u/JoeDirt1560 at 2025-06-29T19:44:01Z
The beta for the Dirte Dozen(formally JD 12) is going good. It's a 12ga break open shotgun made with common hardware and can be made simple hand tools. Cost @ $75. The metal L brackets have done well in adding strength and none of the builds have had any frames failures during testing. Now there is a double barrel version that needs some testing then we can set sail.
The Ark @fosscad.io FEER inspired BCM sopmod 0 1" Riser
Originally posted by u/drcmda at 2025-06-29T19:35:23Z
Processing img mgu9qvhw3x9f1...
Brings it in line with Unity. https://makerworld.com/en/models/1561792-bcm-gunfighter-stock-sopmod-mod-0-1-riser
The Ark @fosscad.io ISSC SPA Rifle
Originally posted by u/Local_Introduction28 at 2025-06-29T19:02:16Z
Howdy all,
Saw Centerfire has these kits sans aluminum receiver. I haven’t seen anything related to this sailing as yet but wondered if anyone else has. It’s a straight pull and 22lr so might be a decent candidiate
The Ark @fosscad.io Using solid supports to make a sa lower
Originally posted by u/Klutzy_Ear_3897 at 2025-06-29T19:01:39Z
If you happen to find an stl for a lower that is f/a only and you use solid supports where it was supposed to be cut out to force semi auto would that technically pass nfa? Just a thought, I know most designs are semi auto first
The Ark @fosscad.io Question about grip fitment
Originally posted by u/Hollow_glacier at 2025-06-29T18:54:16Z
Sorry if this isnt allowed on here, but I made this b25-U integrated RK-1 but for some reason the attachment piece for the pictanny keeps bending in this way, is it safe to run it like this? Or should I look for another attachment piece like this?
The Ark @fosscad.io ftn 3 help
Originally posted by u/NeatEducational at 2025-06-29T18:41:24Z
why does the first 1/4 of my print always print like this. printing in pla pro straight from the dryer. I have tried multiple times. I only have this problem when printing the ftn.
The Ark @fosscad.io help with front rail dd19
Originally posted by u/TraditionalCelery233 at 2025-06-29T17:56:16Z
How can i take out the pin? im trying to reuse the front rail. i’ve used a rubber mallet, pliers and a hammer but i can’t seem to fully take out the pin it’s stuck in there good. any other options, should i just buy a new front rail?
The Ark @fosscad.io Any pinky extension for S&W Body Guard 2.0 10rnd mags?
Originally posted by u/RedactedArmory at 2025-06-29T17:37:24Z
The Ark @fosscad.io uspsa mag holster?
Originally posted by u/Insanecracker04 at 2025-06-29T16:45:54Z
trying to get set up for a uspsa match as cheap as possible. Anyone have a line to a uspsa esq mag holster for glock mags? I have the one that looks taco-ish just looking for more options to try
The Ark @fosscad.io Modular Firearm stand
Originally posted by u/Sparrow0914 at 2025-06-29T16:45:45Z
The Modular Firearm Stand is now posted and available. Currently, there are 5 different bases (including single, dual, and triple stands) and 5 different inserts (Glock 17/19, Glock 43/48, Staccato, AR, and 10/22) to choose from.
Please let me know if there is a different insert you would like, and I’d be happy to create it.
https://makerworld.com/en/@Sparrow0914
The Ark @fosscad.io First pa6-cf build
Originally posted by u/Known-Garbage-6305 at 2025-06-29T16:20:46Z
After leading the hard way the importance of drying and printing from a dry box I've finally finished my first PA6-cf project. How'd I do?
The Ark @fosscad.io PET-CF with brick layers - strong af
Originally posted by u/wuzi86 at 2025-06-29T15:44:52Z
I just printed a test part with this post processing script with orca: https://github.com/GeekDetour/BrickLayers
I adjusted the flow to 115% and a 2-wall test cube came out with very good layer adhesion and the dimension of the wall was also exactly 2x the extrusion width. It definetely feels stronger than any other test part i print before.
Siraya Tech PET-CF 320C nozzle 65C chamber 85C bed 20mm³ flow 0.18mm layers 0% fan 0.6mm nozzle 5 seconds+ layer time Wall generator: classic
The Ark @fosscad.io What are good filaments for mag followers that last?
Originally posted by u/Chocolat3City at 2025-06-29T14:49:53Z
Looking for a filament that doesn't require too much smoothing, wont deform in a hot car or under the stress of being in a loaded mag for extended periods of time, and will resist chemicals (at least the dry lube recommended for 3D printed mags).
ASA is my starting point, but I'd like to know what others are doing. Am I overthinking this?
u/Marksman_Dilbert · 2024-05-15 05:56:04 UTC · score 3
Adhesion with epoxy is very weak compared to mechanical attachments and welding.