Skip Navigation

User banner

Noah

@ noah @fosscad.io

BOT

Posts
68212
Comments
970040
Joined
3 mo. ago

Keeper of the Ark.

  • Love the stipple.

    Jump

  • u/Temporary-Money33 · 2025-01-04 13:43:07 UTC · score 1

    Looks good, you could tune your supports so there’s not so much material left after removal. (I’m assuming that’s where the extra trigger guard material is from) I’d shoot it tho. Good job 👍

  • Love the stipple.

    Jump

  • u/Gunsafe12 · 2025-01-03 22:03:49 UTC · score 1

    That’s the v1

  • Love the stipple.

    Jump

  • Love the stipple.

    Jump

  • Love the stipple.

    Jump

  • u/Scuba-Steve___ · 2025-01-03 23:28:20 UTC · score -4

    https://preview.redd.it/modeui615vae1.jpeg?width=1170&format=pjpg&auto=webp&s=d3d774f36f8ee0c30b14ac21b733f84c26a591e7

    Spooky. I’d calibrate your printer first boss man 😂😂. I can see inbetween the slide and frame a lot of peeled back material suggesting either you didn’t sand it when it needed it or you did.

    Shouldn’t need to sand prints if your printer is calibrated. And in this picture all this material either means over extrusion, under extrusion, z offset, leveling, a lot of things that’d make prints supper weak and brittle. I’d shoot this one with a string if I saw that trigger guard material 😂

  • Per my last post :)

    Jump

  • u/itsmrchedda · 2024-06-11 00:20:06 UTC · score 6

    We're proud of you.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/Ok-Beginning5109 · 2023-04-14 22:13:56 UTC · score 1

    I'm pretty much in the same boat. I was hoping it was going to be a launching point for more design variety like the MAC11, but nothing else has been done. Price of the kit was even dropped substantially which is another poke to those that adopted early. Would have rather have a MAC kit and $150.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/TheLegionnaire · 2023-04-14 20:53:20 UTC · score 2

    Yeah I've got a complete build that's been sitting around forever waiting for a testfire. During that time they sent me the new muzzle device. Thank fuck I didn't try it before. Also my channel for the charging handle wasn't tapped real well and I really had to crank on it with pliers/vicegrips. Not too impressed with MAF so far. Also not really stoked to take the TacDaddy out to the range. Been a few times and just said "Naaw, I'll wait a bit for that one." Also seriously waiting for a better remix of the lower. Have attempted several times in tinkercad to get rid of that curve at the front and add a bit of rail, but haven't found a design to settle on yet. Total noob at that.

    The overall idea is really cool, but it seems lackluster when compared to other designs. Absolutely in love with my MacDaddy build, in fact was a little let down it felt much nicer than my expensive ar9 build. Word on the street is the next version will have LRBHO which would make it a very viable option for actual defense use, cherry on top is that the heavy ass front end negates most muzzle rise.

    ​

    Long story short the TacDaddy seemed like an awesome idea on paper. Not so much when applied to real life.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/coomer69420epstein · 2023-04-13 00:54:50 UTC · score 3

    Alright, I'll give it a shot. Just wish they'd said something at all.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/chickenflavcookies · 2023-04-13 00:40:54 UTC · score 2

    Didn’t notice any binding , just tightened normally but didn’t over tighten

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/TheLegionnaire · 2023-04-13 02:35:38 UTC · score 1

    I had to use a pair of pliers to get leverage on it, mine wasn't tapped well at all.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/Ok-Beginning5109 · 2023-04-13 01:32:48 UTC · score 13

    Between this and the undersize muzzle devices, MAF has been screwed pretty hard by their TAC-9 manufacturer.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/chickenflavcookies · 2023-04-12 22:19:49 UTC · score 3

    Not home atm but yes using both recoil springs, they actually had to send a replacement spring when I first received the order because the smaller of the two wasn’t the correct OD

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/TankDestroyerSarg · 2023-04-13 04:12:15 UTC · score 3

    Well I'm glad Florida-Man figured it out and is so good to work with.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/chickenflavcookies · 2023-04-13 00:42:05 UTC · score 5

    Send them another email following up from the previous one.. took me a few days but heard back today

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/chickenflavcookies · 2023-04-12 20:37:31 UTC · score 9

    Honestly not sure what it’s made of but MAF did just respond so that’s a plus. They are sending another replacement 🎉

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/AccordingWrap105 · 2023-04-13 13:53:18 UTC · score 2

    Your charging handle is hitting the rear of the charging handle's slot, and it's shearing (think scissors). The harder a metal, the less elastic it is. Mean the less it will bend or deform. Your charging handle seems pretty hard as it broke and not bent, in only two rounds.

    As others have said, add some type of shim to the inner rear of your receiver to prevent the charging handle from contacting the rear of the slot.

    A sten gun has a similar arrangement. A 6mm charging handle slot with a 10mm hole to allow disassembly. During firing, the charging handle never comes into contact with either end of its charging slot. I think yours is a little off.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/illegalbutwhy · 2023-04-12 23:08:58 UTC · score 1

    When you tightened the charging handle down did it kind of bind at the end of the channel? Asking because that's what mine does, I have to have the charging handle a little loose for the bolt to fully reciprocate. I havent shot it yet.

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/angry4nus · 2023-04-12 22:15:52 UTC · score 1

    Would sticking a washer in the back fix this issue?

  • Tacdaddy charging handle issue… this is the second one that was sent to me. Broke after 2 round, anyone know the thread size or a fix? Still no word from MAF.

    Jump

  • u/Born-Net2861 · 2023-04-12 21:36:43 UTC · score 12

    Glad MAF responded and are making it right! I am probably going to design and print a TPU buffer once I get mine assembled. I'll upload it to the sea once tested.

  • The Ark @fosscad.io
    Noah
    BOT

    TPU Suppressors

  • The Ark @fosscad.io
    Noah
    BOT

    Bic safety Glock takedowns?

    Originally posted by u/Jason_Patton at 2025-06-29T14:26:30Z

    Reddit permalink

    Not sure about the size but with some monkey fist bashing it should bend into fit/might work in a pinch.

    Side note if your OEM or whatever you use doesn’t stick into your squirted glizzy don’t be afraid to get the tip hot and stick it in..

  • The Ark @fosscad.io
    Noah
    BOT

    5.7 pocket pistol?

    Originally posted by u/Agitated-Werewolf846 at 2025-06-29T13:40:36Z

    Reddit permalink

    Hello everyone so i was wondering how hard do you think it would be to design a semi auto pocket pistol in 5.7x28? It seems like it would be the perfect caliber for a small compact handgun considering its centerfired and you can stack it like a rifle mag plus the low recoil. Now i know power wise it probably wouldn't do a lot of damage but I think it would be neat

  • The Ark @fosscad.io
    Noah
    BOT

    TPU Pimmel on the range

    v.redd.it /mv4e12bx8v9f1
  • The Ark @fosscad.io
    Noah
    BOT

    TPU Suppressors

    Originally posted by u/sanfte8 at 2025-06-29T13:10:05Z

    Reddit permalink

    So I thought to myself if commercially available suppressors use wipes, why not use TPU for the whole suppressor. After printing a TPU suppressor and having it in my Hand I kinda had the urge to order pink TPU Filament and make a new Design with two expansion chambers and a bigger tip. So here it's sailing under the name "TPU Suppressors". Made for .22lr! I made a few versions and tested three different Filaments -had the best results using Overture TPU. They can easily be printed with the threads ready to screw it to a muzzle. Of course you must obey your local laws!!! (Also added a model with a regular 7mm through hole if you really want to print it in PLA, but here you may have to cut the threads again with a tap to make it fit.) Going to upload a video in a separate post

  • The Ark @fosscad.io
    Noah
    BOT

    Super safety issues

    Originally posted by u/Adventurous-Back-819 at 2025-06-29T12:57:40Z

    Reddit permalink

    So i have a pdw honey badger 11.5 clone in 5.56. I had to buy a special honeybadger buffer spring and weight in order to get my SS running smoothly. . I've shot it a couple times over the past few weeks putting a 30 round mag threw it on different occasions. Well yesterday me and my friends went out to my range where i gave it hell for the first time and it ran fine the first 100 rounds "3 mags or so" but then it started dead triggering. . Was running 62 grain green tips then swapped over to 55 grain fmj's when it started to dead trigger. Ran 1 mag of the 55 grain and it ran fine then started to dead trigger again on the 2nd mag. Any suggestions on what it could be? Field stripped the trigger and hammer and both are fine, along with the SS. It just isnt running right, could it be over heating and causing it to malfunct

  • The Ark @fosscad.io
    Noah
    BOT

    Yeet 22

  • The Ark @fosscad.io
    Noah
    BOT

    Yet another DeAR22 build

    Originally posted by u/carpecervisi at 2025-06-29T12:41:17Z

    Reddit permalink

    [removed]

  • The Ark @fosscad.io
    Noah
    BOT

    Has anyone ever tried Tec 22 3d print

    Originally posted by u/Early-Translator7952 at 2025-06-29T12:02:21Z

    Reddit permalink

    I’ve seen variants of 10/22 but wondering if there is an actual Tec 22 print using 10/22 parts?

  • The Ark @fosscad.io
    Noah
    BOT

    Has anyone tried it?

  • The Ark @fosscad.io
    Noah
    BOT

    F*ck Canadian laws bruh

    Originally posted by u/Massive-Contact1149 at 2025-06-29T09:58:31Z

    Reddit permalink

    How do i go about safely making a gun like the ez22 in Canada. What are the big no's to avoid any unwanted attention or possibly legal action against me. Just turned 18 and got my PAL license and would prefer not to have a criminal record, effectively ruining the rest of my life please.

    Also, side note: Do gun ranges check what gun i bring in? Dont wanna end up reported by some range i go to to use my guns.

  • The Ark @fosscad.io
    Noah
    BOT

    DB9 5.7 super safety question

    Originally posted by u/WoodenSector1500 at 2025-06-29T08:58:03Z

    Reddit permalink

    Has anyone successfully super safety’d the DB9 5.7?

    Ive seen lots on the 9mm but haven’t come across a 5.7 that was super safe

  • The Ark @fosscad.io
    Noah
    BOT

    Want to put a fake holo on g19 would this suffice?

  • The Ark @fosscad.io
    Noah
    BOT

    Found some flared magwell files

  • The Ark @fosscad.io
    Noah
    BOT

    Pistol grip with picatinny rail

    Originally posted by u/lackofintellect1 at 2025-06-29T07:37:05Z

    Reddit permalink

    Looking for an stl... something like a pistol grip with a top picatinny rail so I can take my thermal walking and take vid.

  • The Ark @fosscad.io
    Noah
    BOT

    I noticed on the step files for the hd 22c there isn’t an extractor or threaded part on the front . Why?

  • The Ark @fosscad.io
    Noah
    BOT

    AMBI 3pos selector for Kabuto/Saikou safety

    Originally posted by u/Fl-Eggs at 2025-06-29T06:28:09Z

    Reddit permalink

    The title says it all. Ambi selector for the kabuto safety. Uses an m3 bolt and heat insert to hold the right side on. Also added a pocket in the middle for a steel rod to reinforce the selector. Sailing Also included is a hollow pin for kabuto to add the same steel rod as extra reinforcment

    Source: https://i.redd.it/nfd8eb6q8t9f1.jpeg

  • The Ark @fosscad.io
    Noah
    BOT

    Feeding problems

    Originally posted by u/ImpossiblePurple9574 at 2025-06-29T06:24:15Z

    Reddit permalink

  • The Ark @fosscad.io
    Noah
    BOT

    Advice for beginner

    Originally posted by u/[deleted] at 2025-06-29T05:49:16Z

    Reddit permalink

    [removed]

  • The Ark @fosscad.io
    Noah
    BOT

    Shameless stl begging- okboomer with full length rail that accepts grip panels and grip safety

    Originally posted by u/cr4zyabu at 2025-06-29T05:43:47Z

    Reddit permalink

    I lost my phantom jig and don't know cad lol

    Got a sick cwa 22lr conversion kit I've been wanting to build