Keeper of the Ark.
The Ark @fosscad.io Bolt action BUBAR10 Update
Originally posted by u/GutsnFlesh at 2025-06-09T21:37:33Z
100 rounds in so far lower holding up nice 👍🏽
Source: https://a.thumbs.redditmedia.com/USuxinxC_f5LPoWRjrQ4oyN27exLc6cvh2Vy4HxRTW0.jpg
The Ark @fosscad.io Glock trigger spring
Originally posted by u/5kbamz at 2025-06-09T21:32:39Z
Why is my trigger releasing when I move the trigger safety and don’t apply any pressure? This is my first fmda 19.2 build, help please thanks
The Ark @fosscad.io Any Advice on my First?
Originally posted by u/HippocratesII_of_Kos at 2025-06-09T21:23:14Z
Hello!
I'm new to printing, and this was my first firearm print. It took about 12 hrs. I don't know if that's normal, but I slowed the base speed down a little (50mm/s) from my usual for things like grips (100mm/s+). Anyway, hoping for a little advice to make this one turn out better. I think some more supports would've helped. But, even where it was supported, part of the filament sagged into spaghetti.
https://preview.redd.it/6vyfolnkxy5f1.jpg?width=3024&format=pj
The Ark @fosscad.io LtWt, Modular SSAUG Drill Guide
Originally posted by u/AemAer at 2025-06-09T21:07:06Z
Now sailing the sea on my ship. This drill guide is much lighter than the original, includes geometry meant to reduce failed overhangs, requires no supports, and includes the shown-above version allowing you to change the drill guide heads instead of needing to print a new one each time.
Other improvements to the SSAUG FCG pack are underway, and a compilation will be released. Apologies for those who weren’t able to get s3igu2’s before he removed it.
Source: https://i.redd.it/3muquqbbvy5f1.jpeg
Source: https://b.thumbs.redditmedia.com/r4E1ou9ExQ3qgvaEsHN6BN1a63VZhcSWgNIJJFXEfpk.jpg
The Ark @fosscad.io the chiappa we have at home
Originally posted by u/FaithlessnessNo4226 at 2025-06-09T21:04:43Z
all completed, simplier than i thought. tests were successful (shoot almost 100 22lr with full powder without a single misfire)
Source: https://i.redd.it/n1s6gupvuy5f1.jpeg
Source: https://b.thumbs.redditmedia.com/j3qdAoJdtlq7geWiPuXkg_dKllfaVWI-BiE3ZZYjS8g.jpg
The Ark @fosscad.io Another DB9
Originally posted by u/sandshark- at 2025-06-09T20:50:16Z
Finally together, still working on the folding component. I just have some temp bolts in atm. But thought I’d share some progress pics anyway.
Source: https://a.thumbs.redditmedia.com/wN-iAZdUczBNS5pI8peqSCjxBSZkDWx3f6C-9kwJQ28.jpg
The Ark @fosscad.io Ftn 3 or 4 preference...
Originally posted by u/lackofintellect1 at 2025-06-09T20:31:38Z
Been running through the ftn variants and enjoying myself. I'm wanting to run a 30 cal next. What's the take on 3 vs 4 version release? Ive been through the Readme but wanna hear some in the wild accounts of their experiences. I'm ready to squirt one out considering my build is almost done. I'm running low on filament and dont wanna have ro run more then twice dialing in settings. So the real question is more about decimal level and durability. Wich version does what for you?
The Ark @fosscad.io Recommendation for AR22 lower for SS
Originally posted by u/f30tr0ll at 2025-06-09T20:21:38Z
Got my SS running on my standard AR lower. Have a DS1913 that is significantly off from my non printed lower. What are people printing to put SS in?
The Ark @fosscad.io Anyone got the STL for a G17 or G19 beavertail backstrap? If not I'll buy it on ebay for $6.99 lol
Originally posted by u/No-Jicama5184 at 2025-06-09T20:10:18Z
The Ark @fosscad.io Someone F'd up
Originally posted by u/LowerEmotion6062 at 2025-06-09T19:37:41Z
Looks like someone tried to trade a SUDY for an ATV and didn't do the semi conversion.
https://www.facebook.com/share/p/1CJSEuAmbf/
Source: https://i.redd.it/mi50bd0dfy5f1.jpeg
Source: https://b.thumbs.redditmedia.com/1p_vU98d_5lU1JXahl6ltU1vifG6XbUrASqEzTValZc.jpg
The Ark @fosscad.io Having trouble with lift/curling when printed flat. Is this a viable solution?
Originally posted by u/machu505 at 2025-06-09T19:27:45Z
Source: https://i.redd.it/f3e4x92bdy5f1.jpeg
Source: https://b.thumbs.redditmedia.com/zD1pj8ECtQs8I7Aqd9slqVfEtMtV2FGVAR863dUvrls.jpg
The Ark @fosscad.io Sd40ve mag catch spring
Originally posted by u/BillCosbysDong at 2025-06-09T19:25:08Z
I’ve assembled everything on my SD40ve other then the mag catch spring. The hole for the spring goes all the way through the frame. When I look at all the models from spaceboundtactical in the slicer, they all have the mag catch spring hole going all the way through the frame to where it just falls all the way through. What am I missing here? Sorry if this is a rarded question but some insight would be appreciated
Source: https://a.thumbs.redditmedia.com/1mNz4x3A1anhDXohtwU3oP0gRl01_S_JCjCrKsaDUw8.jpg
The Ark @fosscad.io could the PM4 Songbird Centerfire be printed completly in pla pro/+?
Originally posted by u/SecretarySlow8748 at 2025-06-09T18:43:51Z
Title
The Ark @fosscad.io SS Trigger Cut: Rounded vs 45 degree?
Originally posted by u/TheLastCaucasian at 2025-06-09T18:43:39Z
What's the difference in the rounded cut vs the angled cuts on a trigger for Hoffman's SS? I'd ask on r/SuperSafety but you'get banned if you criticize RBT on there and I didn't know that - which is a bummer, must be a new rule.
Rounded trigger cut image attached - ignore red/yellow, just the best pic I found of the rounded cut.
The Ark @fosscad.io Where's the files for this thing?
Originally posted by u/thesupemeEDGElord666 at 2025-06-09T18:38:26Z
[deleted]
Source: https://i.redd.it/lvtjw9mrbx5f1.jpeg
Source: https://a.thumbs.redditmedia.com/pSrkwk6mW0cEucI5NyTACUG1-rOK_c1RyIMIA8ETn88.jpg
The Ark @fosscad.io SS question
Originally posted by u/TheLastCaucasian at 2025-06-09T18:37:21Z
What's the difference in the rounded cut vs the angled cuts on a trigger for Hoffman's SS? I'd ask on r/SuperSafety but you'get banned if you criticize RBT on there and I didn't know that.
The Ark @fosscad.io Extra Cut of barrel use
Originally posted by u/Ill_Doubt5116 at 2025-06-09T18:14:44Z
I have a .22 bolt rifle I cut the barrel in half and I don’t want to get rid of the other half is there anything I can do with it
The Ark @fosscad.io PAHT-CF Profile & Preferred Software
Originally posted by u/RedDotEm203 at 2025-06-09T18:09:37Z
[removed]
The Ark @fosscad.io 1411 recoil systems
Originally posted by u/Junior_Salad_4379 at 2025-06-09T18:08:20Z
Saw a Facebook page advertising many of our favorite creations for very cheap and was wondering if anyone’s actually ordered from them or not
The Ark @fosscad.io Adaptation
Originally posted by u/Dangerous_Time_4510 at 2025-06-09T17:26:12Z
[removed]
u/thesissywantdinbadus · 2025-05-29 10:57:22 UTC · score 1
the dd rails don't work:(