Skip Navigation

User banner

The Shittinator

@ TheShittinator @forum.guncadindex.com

Posts
11
Comments
255
Joined
4 mo. ago

Administrator of the GunCAD Index and the GunCAD Forums.

Matrix: @shittinator:matrix.orgTwitter: @theshittinatorReddit: /u/shittinatorDiscord: @shittinator

PFP: 1.1e+10

  • When will they learn ??

    Jump

  • The fact that it's its own app. That plus resistance to change, from what I can tell.

  • Rate of fire please

    Jump

  • The bot might not be responding since you marked your account as a bot too.

  • Layer/ cooling fan setting suggestions

    Jump

  • Talking about those feed lips? Are you sure it's fan speed and not bed adhesion? Those look like sheer layer shifts, like it started wiggling off the plate and the printer deposited the layers incorrectly. It can happen with these tall guys, especially when you print 2 and the head has to travel between them and potentially impart higher-energy travel forces into the part.

    Either way, material settings should let you set minimum layer times. It'll slow the extrusions down. May also wanna make good use of your gcode viewer by switching between layer time and fan rate views.

  • Frt or SS for plastikov

    Jump

  • 3DP90 Bolt Weight

    Jump

  • FOSSCADToo Mods

    Jump

  • For sure man.

  • FOSSCADToo Mods

    Jump

  • You got one-guy'd. I'm chatting with bildo now to get some clarity regarding their stance on mentioning the site.

  • FOSSCADToo Mods

    Jump

  • Also OP, your reddit username would be appreciated

  • FOSSCADToo Mods

    Jump

  • Printing with Privacy on Bambu

    Jump

  • It has to do with the compute. They may speak the same protocols to Bambu network services and have similar underlying drivers, but the X1 has a full fucking ARM Linux board in that head unit where the P1S runs a random microcontroller. x1plus is a custom Linux distro with an ARM bootloader, not too dissimilar to a RasPi.

  • GunCAD Index 1.3.1 Released

    Jump

  • Smol stuff, but it gives another forward-facing stat for those curious. It's a rolling "this month" -- the past 4 weeks, not everything from the calendar month.

  • Printing with Privacy on Bambu

    Jump

  • As an X1C user, I agree wholeheartedly. I'd also advise those of us who have X1s to run the x1plus custom firmware, as it enables more freedom to manipulate your printer and lets you actually have faith in LAN Mode.

  • Can not quiet enough on 22lR - alternatives?

    Jump

  • I wonder how much you can mitigate that with a printed receiver and a Proto Barrel. More plastic, less metal, quieter action?

  • Featured

    Welcome To The Build Show

    Jump

  • you a real one <3

  • SF5 updates / remixes?

    Jump

  • You've got two approaches to fixing safety wobble:

    1. Take a consistent-diameter dowel and fashion your own detent; or
    2. Reprint and step-down the detent hole with multiple bits. You want to run a smaller-diameter bit through it that corresponds to the smaller diameter of the detent, then a larger one just deep enough to let the detent present to the cam properly without overextension. I forget which bits you need, but they're common imperial sizes

    There are one or two remixes for the SF5, but no major forks of it. Can try a monolithic lower or tapered handguard if you'd like.

  • Fm-15 stovepipes

    Jump

  • How many rounds has this thing been through, what troubleshooting steps have you attempted, and how consistent is the malfunction? Does it happen with other magazines?

  • Skeletonized Waffle Mag?

    Jump

  • Skeletonized Waffle Mag?

    Jump
  • Featured

    Welcome To The Build Show

    Jump